StrapTRAC Wall
Call for Price
Copiers and other large equipment are a potential hazard during an earthquake. The StrapTRAC-Wall’s steel plate strap with 3M adhesive is attached to the equipment, and the other end is secured to a wall stud. This is done on both sides of the equipment. A steel buckle is used for adjustment and to disconnect the equipment from the wall. The straps can be adjusted so the equipment can be as far away as 4 feet from the wall.
Each Kit Contains:
2 (48″) straps using a steel plate with 3M adhesive
2 steel buckles
2 wood stud screws
2 washers
2 surface prep pads
Instructions
Description
Copiers and other large equipment are a potential hazard during an earthquake. The StrapTRAC-Wall’s steel plate strap with 3M adhesive is attached to the equipment, and the other end is secured to a wall stud. This is done on both sides of the equipment. A steel buckle is used for adjustment and to disconnect the equipment from the wall. The straps can be adjusted so the equipment can be as far away as 4 feet from the wall.
Each Kit Contains:
2 (48″) straps using a steel plate with 3M adhesive
2 steel buckles
2 wood stud screws
2 washers
2 surface prep pads
Instructions
Additional information
| Weight | 0.75 lbs |
|---|---|
| taxable | t |
